When you buy wattson, you receive a wattson display (1), a transmitter (2) and a sensor clip (3).
The sensor clip attaches to one of the mains electricity cables leading from your home’s meter box to your fuse box or distribution box.
single phase Electricity supply
Before purchasing wattson you should check that you or an electrician have access to these cables.
To check:
• The supply cables should be no more than 12mm in diameter.
• There should be a gap of 15mm behind the cable.
• There should be a length of 25mm of cable for the clip to be attached to.
SINGLE PHASE ELECTRICITY SUPPLY EXAMPLES
Economy 7 supply
SINGLE PHASE
THREE PHASE
Renewables (solar panels / windturbine)
we do have a specific installation guide for renewables. click here to download PDF. click here to download PDF.
Three Phase Electricity Supply
When you purchase Wattson you will be provided with a single sensor clip. Most homes around the world use single phase electricity and only require one clip to measure. Some premises may have 3- phase electricity installed, this is normally for houses with larger electricity loads and most businesses. To measure three phase electricity you will need to purchase 2 extra clips @£9.95 each. buy here
Newer properties may have large plastic protection around the cables, or the cables built into the wall of the property. In these cases, please consult a qualified electrician for the installation of your wattson.
